By Polat Ayhan, Founder of Maple Roofing and Masonry
The different types of roofing materials used on GTA homes are asphalt shingles, metal, flat roof membranes (modified bitumen, EPDM and TPO), cedar shakes, slate, and clay or concrete tile. Asphalt shingles cost the least up front, while metal, slate and tile last far longer. The right choice depends on your roof’s slope, budget and how well the material handles Greater Toronto Area winters.
- Architectural asphalt shingles last about 30 years and 3-tab shingles about 20 years, according to the InterNACHI life expectancy chart.
- Metal roofing lasts about 40 to 80 years, and slate about 60 to 150 years (InterNACHI).
- Flat roof membranes have shorter lives: EPDM about 15 to 25 years, modified bitumen about 20 years and TPO about 7 to 20 years (InterNACHI).
- Lifespans assume regular maintenance; severe weather and poor ventilation shorten them.
- Pitched roofs and flat roofs need different materials, so slope narrows your options before budget does.
What are the different types of roofing materials?
Most GTA homes use one of six roofing material groups, and each suits a different roof slope and budget. Here is what each one is and where it fits.
Asphalt shingles
Asphalt shingles are the most widely used roofing material in North America. They come as flat 3-tab shingles or thicker architectural shingles, which add depth and last longer. They are the lowest-cost option for pitched roofs. See our asphalt roofing page for installation details.
Metal roofing
Metal comes as standing seam panels or metal shingles in steel or aluminium. It sheds snow well and lasts two to three times as long as asphalt, but costs more to install.
Flat roof membranes
Low-slope roofs on additions, garages and many Toronto semis need a continuous membrane rather than shingles. The common systems are modified bitumen, EPDM rubber and TPO. Our flat roofing contractors can explain which system fits your roof.
Cedar shakes
Cedar gives a natural, textured look and suits older and heritage-style homes. It needs more upkeep than other materials, because wood holds moisture and can grow moss on shaded roofs.
Slate
Natural slate is one of the longest-lasting roofing materials. It is heavy and costly, and the roof structure must be able to carry its weight.
Clay and concrete tile
Tile lasts a very long time but is heavy. In freeze-thaw climates like the GTA, choose tile rated for freezing conditions, since water in the tile can crack it.
How long does each roofing material last?
Roofing materials range from about 7 years for some flat roof membranes to over 100 years for tile and slate. The table below compares the different types of roofing materials side by side.
| Material | Typical lifespan | Upfront cost (relative) | Best for | GTA winter notes |
|---|---|---|---|---|
| 3-tab asphalt shingles | About 20 years | Lowest | Pitched roofs on a tight budget | Wind can lift lighter shingles |
| Architectural asphalt shingles | About 30 years | Low | Most pitched-roof homes | Good all-round choice with proper ventilation |
| Metal (standing seam or shingle) | 40 to 80 years | Medium to high | Long-term owners, snowy roofs | Sheds snow well; snow guards may be needed over doors |
| Modified bitumen | About 20 years | Low to medium | Flat and low-slope roofs | Seams must be sealed well against ponding water |
| EPDM rubber | 15 to 25 years | Low to medium | Flat roofs, additions, garages | Stays flexible in cold weather |
| TPO | 7 to 20 years | Medium | Flat roofs needing a reflective surface | Quality varies by manufacturer |
| Cedar shakes | About 25 years | Medium to high | Heritage and character homes | Needs regular maintenance in wet, shaded spots |
| Slate | 60 to 150 years | Highest | Homes built to carry the weight | Very durable once installed |
| Clay or concrete tile | 100+ years | High | Homes built to carry the weight | Use freeze-thaw rated tile |
Lifespans are from the InterNACHI Standard Estimated Life Expectancy Chart and assume regular maintenance. Costs are shown in relative order only, since prices vary with roof size, pitch and access.
Which roofing material is best for GTA winters?
In the GTA, the best roofing material is one that handles snow load, ice and repeated freeze-thaw cycles. Architectural asphalt shingles and metal both perform well when the roof is properly vented and insulated.
Poor attic ventilation causes more winter roof problems than the material itself. Warm air melts snow on the roof, the water refreezes at the cold edge, and ice dams push water under shingles. Good ventilation, insulation and an ice and water shield along the eaves protect any pitched roof.
How do you choose the right roofing material?
Choose your roofing material by starting with roof slope, then budget, then how long you plan to stay in the home.
- Roof slope. Pitched roofs take shingles, metal, cedar, slate or tile. Flat and low-slope roofs need a membrane.
- Structure. Slate and tile need a roof frame strong enough for their weight.
- Budget and time in the home. Asphalt costs less now; metal and slate cost more but may never need replacing while you own the house.
- Look of the home and street. Some heritage areas and condo or HOA rules limit material choices.
- Installer experience. Any material fails early if it is installed badly, so ask roofing contractors how often they install the material you want.
Whatever material you choose, regular care decides how close it gets to its full lifespan. Our roof maintenance guide covers the seasonal checks for every type of roof. If you are planning a full reroof, start with our new roof installation page.
How can you tell what your roof is made of?
You can usually identify your roofing material from the ground. Flat 3-tab shingles show even rows of identical tabs, while architectural shingles look layered and uneven. Metal shows long vertical seams or a stamped pattern, and flat roofs on additions or garages are almost always a membrane. If you have the paperwork from your last reroof, it will name the product and the year it was installed, which tells you how much life is left.
Not sure which roofing material suits your home?
Maple Roofing and Masonry, a roofing and masonry contractor serving Toronto and the GTA, can inspect your roof and talk you through the options. Our roofing contractors install new roofs and replacements across Toronto, Mississauga, Brampton, Markham and Richmond Hill.
Frequently asked questions
What is the most common roofing material in Ontario?
Asphalt shingles are the most common roofing material on Ontario homes. They are affordable, easy to repair and suit most pitched roofs. Architectural shingles are now more popular than 3-tab shingles because they last longer and resist wind better.
Which roofing material lasts the longest?
Slate and clay or concrete tile last the longest, often 100 years or more with regular maintenance. Metal roofing is next at about 40 to 80 years. These materials cost more up front and are heavier, so the roof structure must be checked first.
Is metal roofing good for Canadian winters?
Yes. Metal sheds snow quickly, resists ice damage and lasts for decades. It needs snow guards above doors and walkways so snow does not slide off in one sheet, and it needs good attic ventilation like any other roof.
What roofing material is best for a flat roof?
Flat roofs use membranes such as modified bitumen, EPDM rubber or TPO rather than shingles. EPDM stays flexible in cold weather, while modified bitumen is a common, durable choice. The best option depends on the roof’s size, drainage and how it is used.
Can you put a different roofing material on an existing roof?
Often, yes, as long as the slope and structure suit the new material. Switching from asphalt to metal is common. Switching to slate or tile usually needs a structural check because those materials are much heavier.
