Nov 6, 2026

By Polat Ayhan, Founder of Maple Roofing and Masonry

Eavestrough replacement cost in Ontario usually falls between $1,500 and $4,500 for a whole home, according to HomeStars. Seamless aluminum eavestroughs, the most common choice, run about $13 to $16 per linear foot installed, plus downspouts and removal of the old system. The final price depends on the length of your roofline, the eavestrough size and material, the number of downspouts, and whether fascia boards need repair.

  • A whole-home eavestrough replacement typically costs $1,500 to $4,500+ (HomeStars).
  • Seamless aluminum eavestroughs cost about $13 per linear foot for 5-inch and $16 for 6-inch, installed, before HST (BuildersOntario).
  • Labour usually makes up 30 to 50% of the total (HomeStars).
  • Aluminum eavestroughs and downspouts last about 20 to 40+ years; galvanized steel about 20 years (InterNACHI).
  • Clean your eavestroughs at least twice a year, in spring and fall, and more often if your home is near trees.

How much does eavestrough replacement cost in Ontario?

Eavestrough replacement cost in Ontario is usually $1,500 to $4,500+ for a whole home (HomeStars). Most quotes are priced per linear foot of eavestrough, with downspouts, removal of the old system and any extras added on top.

Item Typical cost (installed, before HST)
5-inch seamless aluminum eavestrough $13 per linear foot
6-inch seamless aluminum eavestrough $16 per linear foot
Aluminum downspouts $12 per linear foot
Removal and disposal of old eavestroughs $2 per linear foot
Gutter guards $9 per linear foot
Minimum job $900

Source: BuildersOntario, rates checked October 2026. Prices vary by contractor, region and the details of your home.

What does a full replacement cost on a typical home?

A worked example helps show how the per-foot prices add up. BuildersOntario priced a bungalow with 156 linear feet of eave and four downspouts at $2,820 before HST for 5-inch seamless aluminum, including removal of the old eavestroughs (BuildersOntario).

Bungalow example (156 linear feet) Cost
5-inch eavestrough $2,028
Downspouts (40 linear feet) $480
Removal of old eavestroughs $312
Total before HST $2,820
Total with HST $3,186.60

The same home with 6-inch eavestroughs came to $3,288 before HST. Adding gutter guards added another $1,404.

What affects eavestrough replacement cost?

Two homes of the same size can get very different quotes. These are the main things that change the eavestrough replacement cost:

  • Length of the roofline. More linear feet means more material and labour.
  • Size. 6-inch eavestroughs cost more than 5-inch but carry more water, which suits large or steep roofs.
  • Material. Aluminum is the standard choice; steel and copper cost more.
  • Number of downspouts. Each one adds pipe, elbows and labour.
  • Height and access. Two- and three-storey homes take longer and need more safety equipment.
  • Corners and roof shape. Hip roofs and many corners add mitres and labour.
  • Fascia condition. Rotten fascia boards must be fixed before new eavestroughs go on. If yours are damaged, plan for soffit and fascia replacement at the same time.
  • Extras. Gutter guards, downspout extensions and removal of the old system all add to the total.

How do eavestrough materials compare?

Aluminum is the most common choice in Ontario because it is light, does not rust and is affordable. The table shows typical cost ranges and expected lifespans.

Material Typical cost per linear foot Expected lifespan
Vinyl $3 to $10 25+ years
Aluminum $5 to $15 20 to 40+ years
Galvanized steel $10 to $24 About 20 years
Copper $18 to $40+ 50+ years

Cost ranges: HomeStars. Lifespans: InterNACHI.

Vinyl is the cheapest, but it can become brittle in very cold weather, so most Toronto homeowners choose aluminum.

Seamless or sectional eavestroughs?

Seamless eavestroughs are formed on site from one continuous piece of aluminum for each run, so there are no joints along the length. Sectional eavestroughs come in pieces joined together, and every joint is a place where leaks can start.

Seamless systems cost a little more, about $10 to $20+ per linear foot installed (HomeStars), but they need less maintenance. For most full replacements, seamless is the better long-term choice.

What are the signs you need new eavestroughs?

Check your eavestroughs from the ground after a heavy rain. These signs mean they may need replacing:

  • Water spills over the edge even when the eavestroughs are clean.
  • Sections sag or pull away from the fascia.
  • Joints leak or drip in several places.
  • There is rust, cracks or holes in the eavestrough.
  • Water pools around the foundation or the basement gets damp after storms.
  • Paint is peeling or the fascia boards behind the eavestrough are stained or soft.
  • The eavestroughs are close to the end of their expected lifespan.

Water that spills near the house can lead to foundation and basement problems. If you see water collecting at the foundation, it may also be time to look at basement drainage.

Should you repair or replace your eavestroughs?

Repair makes sense when the problem is limited to one area, such as a single leaking joint, a loose hanger or a blocked downspout. Replacement makes more sense when:

  • Leaks and sagging appear in several places.
  • The eavestroughs are sectional and the joints keep failing.
  • The system is undersized and overflows in heavy rain.
  • The fascia behind them needs replacing anyway.
  • You are replacing the roof, since new eavestroughs can be fitted at the same time.

Our eavestrough contractors can check your system and tell you whether a repair will do the job.

How often should you clean eavestroughs?

Clean your eavestroughs at least twice a year: in late spring, after trees drop their seeds, and in late fall, once the leaves are down. Homes with large trees nearby may need cleaning three or four times a year.

Tips for cleaning eavestroughs safely:

  • Use a stable ladder with a helper, and never lean the ladder on the eavestrough itself.
  • Scoop out leaves and debris by hand or with a gutter scoop, working away from the downspout.
  • Flush the eavestrough with a garden hose to check that water flows to the downspout.
  • Clear any blockage in the downspout from the bottom with the hose.
  • Check for loose hangers, leaking joints and sagging sections while you are up there.

If your home is two storeys or more, or the roof is steep, hire a professional. Eavestrough cleaning is part of good roof maintenance, since blocked eavestroughs can back water up under the shingles and help ice dams form in winter.

Are gutter guards worth it?

Gutter guards cover the eavestrough so leaves stay out while water flows in. They cost about $9 per linear foot installed (BuildersOntario), so they add a noticeable amount to the total.

They are most worth it for homes surrounded by trees, where eavestroughs fill up quickly. Guards still need an occasional check and clean, as fine debris and seeds can build up on top. On a home with few trees, regular cleaning twice a year is often enough.

If you are planning a replacement or are not sure what your eavestroughs need, talk to our eavestrough contractors. For a full check of the roof at the same time, see our roof inspection checklist.

Measure your roofline before you get quotes

Most quotes are priced per linear foot, so it helps to know roughly how much eavestrough your home has. Walk around the house and add up the length of every roof edge that has an eavestrough, then count the downspouts. With those two numbers you can compare quotes fairly and spot one that is far too high or leaves something out.

Eavestroughs overflowing or sagging?

Maple Roofing and Masonry, a roofing and masonry contractor serving Toronto and the GTA, installs and repairs eavestroughs, soffits and fascia across Toronto, Mississauga, Brampton, Markham and Richmond Hill. Talk to our eavestrough contractors about your home.

Frequently asked questions

How much does it cost to replace eavestroughs on a house in Ontario?

A whole-home eavestrough replacement typically costs $1,500 to $4,500 or more. Seamless aluminum runs about $13 to $16 per linear foot installed, plus downspouts and removal of the old system.

How long do eavestroughs last?

Aluminum eavestroughs usually last 20 to 40 years or more, galvanized steel about 20 years, and copper 50 years or more. Regular cleaning and quick repairs help them reach the top of that range.

Is it cheaper to repair or replace eavestroughs?

Repair is cheaper when the damage is limited to one joint, hanger or downspout. If leaks and sagging appear in several places, or the system keeps overflowing, replacement usually costs less over time.

How often should eavestroughs be cleaned?

Clean them at least twice a year, in late spring and late fall. Homes surrounded by trees may need cleaning three or four times a year.

Are seamless eavestroughs worth the extra cost?

For most homes, yes. Seamless eavestroughs have no joints along each run, so they leak less often and need less maintenance than sectional systems.

Written by Polat Ayhan, Founder of Maple Roofing and Masonry.
Polat leads the company's roofing, masonry, foundation and basement waterproofing work for homeowners in Toronto, Mississauga, Brampton, Markham and Richmond Hill. View profile

GET A FREE ESTIMATE ☎ CALL NOW